Skip to product information
Ripsaw Repair Kit - Hydro-Max Jetter
Ripsaw Repair Kit - Hydro-Max Jetter

Ripsaw Repair Kit

SKU: 337-1001858-030

Ripsaw Repair Kit

Are you tired of constantly replacing your nozzle due to wear and tear? Our Ripsaw Repair Kit is here to help! With this kit, you can extend the life of your nozzle and lower your overall operating costs.

Replacing the nozzle with our repair kit is easy! Follow these steps:

  1. Unscrew the end cap on the nozzle using a screwdriver.
  2. Take out the existing components.
  3. Remove the O-Ring from the end cap.
  4. Replace it with the new O-Ring included in the repair kit.
  5. Use a screwdriver and needle nose pliers to remove and replace the inlet screen.
  6. Install the new seat (O-Ring side down).
  7. Push the new rubber boot into the grooves inside the housing.
  8. Insert the new top insert with the lip closest to the end cap.
  9. Place the new rotor into the nozzle.
  10. With the rotor laying against the side, screw on the end cap.

Our Ripsaw Repair Kit includes everything you need to get your nozzle back in working order:

  • Rubber boot
  • O-Ring
  • Rotor assembly
  • Seat retainer
  • Inlet screen
  • Top insert

Tools Needed For this repair, you will need the following tools:

  • Screwdriver
  • Needle nose pliers

Don't let a worn out nozzle slow you down! Get our Ripsaw Repair Kit and get back to work in no time. Order yours today!