Water Selector Rebuild Repair Kit Fits *US Jetting & Harben

Step 1

Begin Assembly In A Cleared Workspace, Gathering All Disassembled Parts, Including:

• The Brass Shuttle Plug
• Brass Handle Stem
• Male Ends
• Shuttle Seats With Guides

Step 2

Screw The Shuttle Seats With Guides Into Both Male Ends.

Step 3

Attach Either The Left Or Right Male End + Shuttle Seat To The Valve. Insert The Brass Shuttle Plug Into The Valve.

Step 4

With The Larger Hole (Handle Stem Hole) Positioned Upwards, Ensure The Shuttle Plug's Divet Is Facing Up. Screw In The Handle Stem And The Remaining Male End + Shuttle Seat.

Step 5

Attach The Handle By Placing It On The Stem And Secure It With The Washer And Nut.

Step 6

Double-check All Connections And Components To Ensure A Stable And Functional Assembly.

Step 1

Clear Your Workspace, Taking Note That There Will Be Several Small Parts When Disassembling A Water Selector Valve.

Step 2

Remove The Handle By Loosening The Nut And Washer At The Base Of The Handle.

Step 3

Position The Handle Upwards And Proceed To Remove One Of The Brass Male Ends On Either The Right Or Left Side.

Step 4

Detach The Brass Handle Stem From The Valve, Allowing The Brass Shuttle Plug To Be Freed From Within The Water Selector Valve.

Step 5

With The Shuttle Plug Now Free, Remove The Remaining Male End That Is Still Attached To The Water Selector Valve.

Step 6

Complete The Disassembly By Removing The Two Shuttle Seats With Guides That Are Attached To The Male Ends.